The decorative effect of the stainless steel decorative board is really good, but it is inevitable to be scratched by frequent touches. If it can be maintained in time, it can effectively delay the use period.
Before introducing the common maintenance techniques for stainless steel decorative panels, let's take a brief look at the classification of stainless steel decorative panels.
according to the color, stainless steel decorative panels can be divided into:
Titanium black (black titanium), sky blue, titanium, brown, brown, fuchsia, bronze, rose gold,etc
According to the surface, stainless steel decorative panels can be divided into:
Mirror panel (8K), Hairline sheet (LH), sanding sheet, and pattern sheet, sandblasting sheet, etched sheet, embossed sheet, composite sheet (composite sheet),etc
3. According to the process, stainless steel decorative panels can be divided into:
PVD Color coating, Water chemical plating, Fluorocarbon paint, and Spray painting.
Through years of practice, we have summarized five common maintenance techniques for stainless steel decorative panels.
First, the surface of the stainless steel is dusty and easily removed. It can be cleaned with a neutral detergent, such as alcohol or organic solvent.
Second, the grease and lubricating oil on the stainless steel surface are contaminated. After wiping with a soft cloth, clean it with a neutral detergent or a special detergent.
Third, the surface of the stainless steel is bleached and various acids are attached. Immediately after rinsing with water, it is washed with an ammonia solution or a carbonated soda aqueous solution, and then washed with a neutral detergent or warm water.
Fourth, the surface of the stainless steel has a rainbow pattern, which is caused by excessive use of detergent or oil. It can be washed with warm water or a neutral detergent during washing. In the end, it is important to avoid wiping with sharp or rough objects. Stainless steel surfaces, such as cleaning balls, can easily scratch the surface of stainless steel, affecting its aesthetics.
Fifth, avoid using washing liquids containing bleaching components and abrasives, steel balls, grinding tools, etc. In order to avoid residual washing liquid, the surface of the stainless steel is corroded, and the surface is washed with clean water at the end of washing.