How to install stainless steel decorative strips

- Jan 16, 2020-

When it comes to modern decoration, people can say that there are quite a lot of decorative materials. Among them, stainless steel decorative strips are one that many people have used in recent years. They are decorative lines made of stainless steel and can be used on walls. It can be used on the side and also on the ceiling. So how to install stainless steel trim? Regarding this issue, you also need to listen to the introduction of professionals, let's understand it together.

stainless steel decoration trim 13

Recessed stainless steel trim installation

  1. First of all, you should prepare stainless steel decorative strips, choose good lines, and make sure that the surface is free of scratches and bumps, and the size is correct.

  2. Check whether the base surface of the seam at the seam is firmly fixed, and whether the seam is uneven, and deal with it.

  3. The opposite position of various decorative lines should be far from the line of sight of people, or placed in an inconspicuous position indoors. Especially the interface is more obvious metal decorative line, more attention should be paid to the position of the counterpart of the decorative line.

  4. First, use a round nail to fix a wooden lining at the closing position. The width and thickness of the wood lining is slightly smaller than the inner diameter of stainless steel.

  5. Then apply epoxy glue (universal glue) to the wooden lining strip, apply epoxy resin to the stainless steel strip groove, and then install the line on the wooden lining strip.

  6. The surface of the stainless steel line groove is generally covered with a protective layer of plastic tape. The plastic tape should be torn off from the stainless steel line groove after finishing the finish. If there is no protective layer of plastic tape on the surface of the line groove, a layer must be pasted before construction to avoid damaging the line surface during construction.

stainless steel trim application 3